Description
Mercedes EQ eDrive 60 mm Core Drill HSS-CO-ECO Weldon
The 60 mm core drill from the ALFRA HSS-CO-ECO series is built for cutting large holes in metal with less load on the machine. Unlike a twist drill, a core drill (annular cutter) does not remove the full volume of the hole. It cuts only a narrow ring, while the core stays in one piece and is ejected through the centre. The result is faster drilling, fewer chips and a clean, accurate 60 mm hole.
Cobalt HSS for longer edge life
The cutter is made of cobalt-alloyed high-speed steel (HSS-Co), which handles heat better than standard HSS and stays sharp for longer. Specially shaped cutting teeth give a smooth, precise cut, which at a diameter of 60 mm is decisive for hole quality and tool life.
Technical data
- Manufacturer: ALFRA
- Series: HSS-CO-ECO
- Diameter: Ø60 mm
- Cutting depth: [DEPTH] mm
- Shank: Weldon 19 mm
- Tool material: HSS with cobalt
- Application: structural steel, profiles, plates, series work in the workshop
What is in the box
- 1 x core drill Ø60 mm HSS-CO-ECO Weldon
- 1 x pilot pin 6,35X102 MM / 50 MM
- EVC Academy access for video how we use it. Only for customers who purchase the kit
This is mandatory tool for EQV eVito eSprint EQC EQB EQA eDrive remanufacturing.
The drilling machine, Weldon holder, adapters and cutting oil are not included.
Important before you buy: a professional pillar drill is required
A 60 mm core drill cannot be used on a hand drill or on hobby-grade pillar drills. For safe and correct operation you need:
- a professional pillar drill with sufficient power and rigidity, able to run at low speed
- a Weldon 19 mm spindle or a suitable holder for Weldon tools
- a firmly clamped workpiece
- continuous cooling and lubrication with cutting oil or emulsion
Using the cutter without a suitable machine leads to broken teeth, damage to the tool and a risk of injury to the operator. Damage caused by improper use is not covered by warranty.
Tips for use
- Mark the centre with a centre punch before drilling so the pilot pin seats accurately.
- Drill at low speed with a steady feed, without forcing the tool.
- Keep coolant flowing for the entire cut.
- After breakthrough, wait for the pilot pin to eject the core. The core is hot and has sharp edges.








