Zoe Q210 Motor milling repair operation manual #202409099586

Repair manual price: 1600€ + Tax BUY REPAIR MANUAL This operation manual is a proprietary business secret that outlines the successful refurbishment process for R240 powertrain system with position sensor defect. By following the provided instruction steps, which include text, images, and videos, you will be fully equipped to repair the R240 effectively and efficiently
You can charge this service: 1500€
You need 2 labor hours to deploy this repair
Common causes:

Overheated oil - never changed oil
Overheated rotor ballbearings - NO ROTOR COOLING
Normal Tear&Wear at 150,000km

Errors:

Motor milling sound
Can drive forward, can't go in reverse. (Broken diff pin)

Part numbers:

290126225R Continental

Tools needed (prepare it) :
  • Rachet: 8, 10, 13, 18, 19, 21
  • Torx:
  • Hydralic bench desk
  • Torque Ratchet
  • EVC Q210 eDrive kit - individual parts list available in manual
Repair operation steps

 1- First step is to safely disconnect vehicle High voltage and Low voltage system. Secure HV gloves and other safety related tools.
Remove GND (negative pole) from 12V battery

 2- Open passanger door and remove floor textile cover and metal cover to access Battery service fuse. They disconnect service fuse. This will ensure that the high voltage system is completely disconnected and eliminate the risk of electrical shock or damage during the maintenance procedure. Always prioritize safety when working with high voltage components
 3- Proceed with frontal side of vehicle and make marking of windshield wipper position with any kind of tape
 4- Unbolt wipper arms and remove them
 5- Remove clips on right and left side of plastic cover and remove complete cover out

2- Open passanger door and remove floor textile cover and metal cover to access Battery service fuse. They disconnect service fuse. This will ensure that the high voltage system is completely disconnected and eliminate the risk of electrical shock or damage during the maintenance procedure. Always prioritize safety when working with high voltage components

 6- Remove 10mm bolts and midle and both sides, remove brake oil bottle, then remove complete metal protection

7 -...

You have reached a restricted content! You must buy this online training operation manual to get access.