Battery – 453EQ BMS Software reset repair manual #2023610123

Repair manual price: 1500€ + Tax BUY REPAIR MANUAL
This operation manual is a proprietary business secret that outlines the successful refurbishment process for BMS Battery system. By following the provided instruction steps, which include text, images, and videos, you will be fully equipped to repair the BMS effectively and efficiently
You can charge this service: 1000€
You need 2 labor hours to deploy this repair
Common causes:

  • Deepdisharge through irresponsible use
  • Deepdischarge after crash incident
  • Botom SOC 0 discharge in bodyshop repair process
  • Powerglitch activated programmed defect with contactor counter 0 error
  • Random programmed defect
Errors:

  • P0DE71C - The cell voltaes of the hybrid/high-voltage battery module are too high. The voltage value is outside the permissible range
  • P0DE763
  • P0DE697
  • P0DE663
  • P0DE61C
  • P0B3B62
  • P0DE616
  • P1D2771
  • P1D2777
  • P1D2785
  • P1D2877
  • P1D2885
  • P056216
  • P0B4487
  • P18051C
  • P0AA100
  • P0AA400

Part numbers:

Copyright Copyright Copyright Cop-XX Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Cop

A7899014200 (location inside battery)
A7899000600 (location inside battery)
A7899003300 (location inside battery)

Tools needed (prepare it) :

  • Soldering iron
  • XPROG Original
  • Adapter
  • Beeprog
  • Firmware file reset editor (available here)
  • Xentry C4 Tool
Repair operation steps

 1- Frist troubleshoot and confirm that you got  errors from the list readed via diagnostic Xentry tool
 2- Open rear BMS plastic cover, dont use screwdriver and dont damage PCB board

-XX Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright Copyright opyright Copyrig

 3 - Open rear cover BMS to access the PCB. Don't  try to lift upper cover where you got 6 connectors because that side is one part with main connector which is pressed into PCB. Not soldered. Use Paint remover to...
You have reached a restricted content! You must buy this online training operation manual to get access.